Site icon AI Synthesis

AI017 Releases a Low Pass Gate, and it Comes In Black

ai017 Low Pass Gate

Hello, some exciting synth news for you:

For Release 7/19/2021 Noon Pacific Time or Later

Abe Ingle

 

Portland, OR, USA July 19, 2021 – AI Synthesis has released the AI017 Low Pass Gate in both a built and guaranteed version, as well as in kit and PCB/Panel format.The AI017 Low Pass Gate Eurorack Module can be used as a Voltage Controlled Filter, Voltage controlled Amplifier, or both. The AI017 is an updated variation of the classic Buchla 200 Series Low Pass Gate, updated with a tunable resonance circuit, and a Depth control. Vactrols are used for control voltage, allowing for classic “ringing” and “bongo” effects.

 

The Depth control compensates the vactrols inability to drop lower than ~100 ohms, which can allow audio bleed on traditional Low Pass Gates. The effect can be switched on or off, as depth will attenuate the classic ringing and bongo effect. This gives the user an easy way to go from a “vintage” Low Pass Gate to a “modern” Low Pass Gate with a flick of the switch. A rear trimmer allows for the tuning of the resonance.

 

And, it comes in Black!

 

In addition to releasing a new Low Pass Gate Module, AI Synthesis is also releasing  Black versions of their modules. The Black versions of the modules have Black and Gold panels, Black knobs, and Black switch caps for a striking look, 

 

Following the tradition of the other eurorack modules, the AI001 Multiple,AI002 Mixer, and AI003 Looping ADSR, the module has a full video how-to build guide. Unlike some DIY companies that focus solely on providing kits, AI Synthesis has an educational mission and our kits and documentation are aimed at those who have never held a soldering iron. PCBS are professionally manufactured, and all panels are aluminum and designed by Grayscale.

“In the year 2000, I was in college and obsessed with modular synths, but could barely afford to eat. I knew it was possible to build your own synth, but there wasn’t anyone, or anywhere to turn to for advice. In the past decade, much more information has been published online, and in 2013 I started down my path to DIY modular. Even with all of the information online, there still lacked a single, simple, comprehensive guide for those looking to build their own synthesizer. I want AI Synthesis to be that guide. Prior to building my own synth, I was a dreamer, after building my modular, I felt I had awoken. I want to help others do the same.”

-Abraham Ingle

Founder, AI Synthesis

 

In addition to providing step by step build instructions, schematics, and circuit explanations, the site also includes a guide for getting started in modular synthesis, and a series of DIY Guides, with information regarding how Resistors actually work, and how to integrate a $26 scope into your Eurorack system.

 

Article Resources:

Image for Press Release AI017: Front Silver, Front Black

More about the AI017 Low Pass Gate.

 

About AI Synthesis

AI Synthesis is a small synthesizer manufacturer in Portland, OR. We produce fully built modules, and easy to build DIY kits with full documentation.

Logos: Red Logo, Black Logo, Circle Logo

 

Exit mobile version