AI006 Eurorack Stomp Box Adapter

The AI006 Eurorack Stomp box Adapter converts the higher signal levels of a modular system to the lower level signals that most stomp boxes are designed for.

The manual is located here.

The Build guide is located here.

The AI006 Eurorack Stomp box Adapter is an updated take on a classic utility circuit that converts the higher signal levels of a modular system to be converted to the lower level signals that most stomp boxes are designed for.

The AI006 stomp box adapter solves two problems. From the Synth input to the "FX"out, the signal is reduced by a factor of 20 to match the signal levels expected by most stomp boxes. From the "FX" input to the Output, the signal is increased by a factor of 20. Passive attenuators are present on both the send and return in case the input or output levels are too great.

This diy stomp box adapter kit will not only familiarize yourself with IC Chips, Capacitors, and Resistors, it will also add a key utility module to your DIY Modular Synthesizer.

This is an ideal kit for a beginner learning DIY electronics, and requires no wiring at all! All parts are soldered directly to the PCB for ease of building and can be built in under an hour.

We recommend this kit as the second module you build. It is easy, and can be built in a single sitting. If it works, you are ready to build other modules.

The Eurorack Kit Contains everything you need to build your DIY Analog Synth Module:

• High Quality 3.5 mm Jacks
• A PCB
• A Eurorack Panel
• High quality Potentiometers
• All components required to build the AI006 Eurorack Stomp Box Adapter.
• Mounting screws
• Power Cable

Here is a post with more technical information about using Using Guitar Pedals with Your Eurorack Modular System.

The AI006 Stomp Box Adapter is a versatile and useful module for Eurorack synth users who want to integrate guitar pedals into their modular setups. It essentially acts as a level shifter, converting the higher signal levels of the modular system to the lower levels expected by most guitar pedals.

Key Features:

• Level conversion: Takes Eurorack signals to guitar level signals suitable for guitar pedals.
• Low noise: Maintains a clean and clear signal path, preserving the integrity of your sound.
• Compact design: Fits conveniently into any Eurorack case with only 2HP required.
• Easy to use: Requires no calibration or special settings, simply patch your Eurorack signals in and your pedal out.

Applications:

The AI006 opens up a wealth of sonic possibilities for Eurorack users:

• Expand your sonic palette: Use guitar pedals to add distortion, overdrive, fuzz, delay, reverb, and other effects to your modular sounds.
• Process modular sounds in new ways: Explore the creative potential of feedback loops, modulation, and other techniques using guitar pedals.
• Create unique and experimental soundscapes: Combine the power of modular synthesis with the diverse range of effects available in the guitar world.