AI016 Eurorack Tape Echo Interface

The AI016 Eurorack Tape Echo Interface is a Limited Edition Module that allows you to use a standard three head tape recorder as an analog tape echo unit. It also provides op-amp saturation on the input when pushed.

The Manual is located here.

The Build Guide is located here.

The AI016 Eurorack Tape Echo Interface is a Limited Edition Module that uses a pre-amp and buffered feedback loops to allow a standard three head tape recorder as an analog tape echo. It also provides op-amp saturation on the input when pushed.

The tape recorder must have three heads (erase, record, and play) for it to work as a tape echo. This type of tape recorder will have a button or switch that allows the monitoring of the source audio, or what has just been recorded to the tape. The space between the record and play head creates the delay, and the Tape Interface feeds back into the unit to create repeats.

The AI016 provides the following tape controls:

• Mix
• Repeats
• Input and Output Controls
• Delay time is controlled by the tape deck. Not all tape decks allow speed control while recording, and modifications may be needed.

Kits include all parts needed to build and mount the AI016 Eurorack Tape Echo Interface:

• Hi Quality Aluminum Panel
• Mounting Screws
• Potentiometers
• Jacks and Nuts
• Power cable

Please note that a three-head tape recorder is needed for tape echo. While I do support the AI016, I do not support 3rd party tape decks or for 3rd Party tape deck modifications. Please read this article on choosing and modifying a tape deck for tape echo.